well thanks to this site and a ton of reading i am at the desired power level i was looking for

my goal is now to try to get 20-24 MPG, since this car is horrible on fuel, some timing adjustments have helped, but the fueling could use some work, so far reading on this site it looks like everyone has been dealing with narrowband, disabling closed loop and adjusting from there, this is a wideband ecu, so i was a little confused on where to start, i tried to basics first, playing with LAMFA, KFLBTS, tweaked FKKVS, but ended up putting all back to stock, as there was no change for a lambda higher then 1, still ran a lambda of .95 - 1.0 lambda

can anyone tell me if im on the right track? im assuming a wideband ecu can have a set target vs narrowband

there is an upper and lower limitation of lambda controller called FRMLASHO - upper threshold for mean value of lambda controller, FRMLASHU - lower threshold for mean value of lambda controller

thanks, if there is something i missed when searching let me know

thank you, seems this may be too much of a task for me at the moment, i'm guessing you guys are finding these values through dis-assembly?

edit : might have found the lambda constant atleast, dis-assembly looks almost identical, but with different locations as expected

location = 93590 in my file for constant, now to find the rest, thanks!