Pages: [1]
Author Topic: Removing P1114 and P1118 on A box  (Read 6035 times)
infinkc
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 94


« on: August 08, 2013, 02:32:36 PM »

I wanted to fully delete the rear 02 sensors on an A box ecu, but these 2 codes poped up.
I tried to change the ESKONF values, but on an A box they are not the same.

Has anyone disabled these codes on an A box?  i all can find is infor for M, L.

thanks!
Logged

ddillenger
Hero Member
*****

Karma: +643/-21
Offline Offline

Posts: 5639


« Reply #1 on: August 08, 2013, 03:01:38 PM »

I got you.

00 FC E0 FF 3C 00 F0 FF AA FA 55 55 55

Becomes

00 FC E0 FF 3C C0 FC FF AA FA 55 55 55

And that's that.
« Last Edit: August 08, 2013, 03:03:12 PM by ddillenger » Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
infinkc
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 94


« Reply #2 on: September 09, 2013, 09:16:28 AM »

thanks, it worked for those codes, but got 2 more that poped up after  Undecided

16524(p0140) and 16544(p0160) No Acitvity on S2's
Logged

ddillenger
Hero Member
*****

Karma: +643/-21
Offline Offline

Posts: 5639


« Reply #3 on: September 09, 2013, 09:19:09 AM »

Sounds like some of your codewords were wrong. You sure you got CDLSH correct? How did you determine the correct address?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)