Pages: 1 [2]
Author Topic: Can flash on bench, but not in car. Why?  (Read 11696 times)
cactusgreens4
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 110


« Reply #15 on: September 23, 2013, 05:51:36 PM »

How did you end up running it? I ran mine to a 3 position switch flush mounted next to the obd port... Flash---OBD.. Now I only need a welded ecu case with bootmode switch...

i did not run anything... i am using the factory wiring.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)