Pages: [1]
Author Topic: Old Audi S4 512kb file Vmax  (Read 5888 times)
Dobermann
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 80


« on: April 10, 2011, 06:32:21 AM »

hello friends

can someone help to find for sure the Vmax values

i think im right !! maybe someone can confirm

Adress 013272 to 013278 is set to 259 bzw 262 kmh

thank you for help

king regards dobermann

Logged
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« Reply #1 on: April 10, 2011, 07:14:06 AM »

I compared those addresses to the known addresses of an mbox.... they were close but not the same layout. I moved your start point back 1 adress to start at 00 and added one address to the end like an mbox xdf has it.
your cbox data: 00 80 81 00 82 00 83 00 83 C0
mbox data:       00 73 00 73 00 73 00 73 00 73

You are looking for 5 values seperated by 0's
I hope this helps.
Logged

I have a b5 s4
but i just want to dance.
Dobermann
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 80


« Reply #2 on: April 10, 2011, 11:28:53 AM »

I compared those addresses to the known addresses of an mbox.... they were close but not the same layout. I moved your start point back 1 adress to start at 00 and added one address to the end like an mbox xdf has it.
your cbox data: 00 80 81 00 82 00 83 00 83 C0
mbox data:       00 73 00 73 00 73 00 73 00 73

You are looking for 5 values seperated by 0's
I hope this helps.

so i looked again but i cant find the limiter !! did you finde the 5 values in my s4 file ?? maybe in the 512 Kb files is the Vmax limter no the same how in the 1 MB s4 files

in the 1MB Files i have no problem to find it !! I have tune an Audi RS4 it take 2 mins to find the Vmax limiter !!

know someone the adress Huh

Logged
setzi62
Full Member
***

Karma: +142/-0
Offline Offline

Posts: 249


« Reply #3 on: April 11, 2011, 03:46:58 AM »

This image has different vmax data compared to newer images.
You found already the right words:
0x013272 is VABSCH
0x013274 is VHYST
0x013276 is VMAXO
0x013278 is VVORH

For all the conversion factor to km/h is 0.00781.
Logged
Dobermann
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 80


« Reply #4 on: April 11, 2011, 09:23:31 AM »

This image has different vmax data compared to newer images.
You found already the right words:
0x013272 is VABSCH
0x013274 is VHYST
0x013276 is VMAXO
0x013278 is VVORH

For all the conversion factor to km/h is 0.00781.



thank you !!! thank you !!!!

I was almost sure I have the right adresses !!! in the newer s4 files the vmax is a little bit different !!

you are completly right !!! the factor is 0,00781 or to get it easy take the value / 128 and you will get almost the same result
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)