NefMoto > Technical > Data Logging > McMessLoggerEvo - realtime ram display and editor, more to come
Pages: 1 2 3 [4]
« previous next »
Author Topic: McMessLoggerEvo - realtime ram display and editor, more to come  (Read 55609 times)
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #45 on: May 30, 2021, 06:53:10 PM »
Quote from: 360trev on May 30, 2021, 01:50:20 PM
I know the author, he's a good friend and he's given me the full source-code to it, which can be built with Visual Studio on Window's.

I will ping him and ask him if I can put it on Github to help the community...

Trev



Good, but where did fluke go? Havent seen him for some time.
Logged
Neuss
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« Reply #46 on: December 12, 2021, 12:29:41 PM »
Quote from: 360trev on May 30, 2021, 01:50:20 PM
I will ping him and ask him if I can put it on Github to help the community...

Any news?
Logged
speed69
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 12
« Reply #47 on: January 31, 2022, 08:37:49 AM »
Quote from: Neuss on December 12, 2021, 12:29:41 PM
Any news?

Waiting for news
Looking forward to use a working version of this software
Logged
StevenW
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34
« Reply #48 on: November 11, 2022, 12:10:13 PM »
Something new here?  Shocked
Logged
flamy
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 56
« Reply #49 on: December 31, 2022, 02:12:20 PM »
Works with 8E0909552C (A4 B6 2.4L V6 BDV) .
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246
« Reply #50 on: January 09, 2023, 04:09:19 PM »
Biggest shit for logging.... if someone needs source code of the functions to play just tell me.
But normal OBD connection and readMemory is even faster then this...

Reading always variable wub  with McMess

GETCHARGED ME7-McMess Version 0.1
Connection to the chip opened successfully
Baudrate set to 10400
Format: 10400 8N1 Set
Starting McMess INIT to 10
Baudrate set to 125000
mcMess init success!
mcMess reset Address!
mcMess read Address!
mcMess reading EPK... 1/ME7.5/51/X505R//24C/Dst03o/190504/   
mcMess testing readMemory... success!
04 02
Reading ECU Voltage value for Speedtest...
11.26V A0 EF 63ms
11.26V A0 F0 64ms
11.26V A0 F0 64ms
11.26V A0 F0 64ms
11.26V A0 F0 64ms
11.26V A0 EF 64ms
11.26V A0 F0 63ms
11.26V A0 EF 64ms
11.26V A0 F0 64ms


Same with normal diagnostic session and readMemoryByAddress
Sleeping for 2000 ms and trying ID 0x11
Trying to Wake up ECU on ID: 11
Baudrate set to 10400
Starting SlowInit to 11
KWP Protocol Version: 2031
Controller give us Communication ID: "11"
Format: 10400 8N1 Set
Starting Communication...
Testing DDLI is enabled for us
DDLI Enabled
Starting 86 Session...
Baudrate set to 56000
Reading ECU Voltage value for Speedtest...
11.26V A0 EF 47ms
11.26V A0 F0 48ms
11.26V A0 EF 47ms
11.26V A0 F0 48ms
11.26V A0 F0 42ms
11.26V A0 F0 54ms
11.26V A0 F0 48ms
11.26V A0 F0 48ms
11.26V A0 F0 44ms
11.26V A0 F0 52ms
11.26V A0 F0 48ms
11.26V A0 F0 46ms
11.26V A0 F0 49ms
11.26V A0 F0 48ms
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #51 on: January 09, 2023, 07:08:48 PM »
Pretty sure what the guy did there was use the crank-sync logging and he patched the routine to have more than 6 addresses.
But... it's just possible to abuse the DDLI arrays on the fly like ME7Logger does without having to patch anything in the file.

So I don't see any point in this.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: 1 2 3 [4]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 05:17:24 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)