alrightroad
Newbie
Karma: +0/-0
 Offline
Posts: 1
|
 |
« on: September 26, 2013, 06:14:03 PM »
|
|
|
Good evening. I have a bench setup, tested successful PIN reads on several C5 allroad and C5 A6 ECU's and printed them to screen no problem. Saved a few bin files, etc. I also used several different cables just to see if they would work with ME7_95040 and yep. Now, when I hook up RS6 ECU's I cannot read either one of them (7.1.1). Received error=0x01. Nothing to do with com port, cable, computer, power supply, etc.
Run positive lead to pin 26 on ECU harness with resistor? I ran positive to 26 without resistor and still error.
Ground the socalled boot pin?
I'm stuck but will keep trying. Thanks, in advance.
|
|
|
|
|
Logged
|
2001 allroad, 2003 RS6
|
