Problem with read flash Nefmoto flasher. SECURED FILE?

Pages: [1]

Author

Topic: Problem with read flash Nefmoto flasher. SECURED FILE? (Read 11995 times)

alizczewy

Guest

	Problem with read flash Nefmoto flasher. SECURED FILE? « on: November 07, 2013, 08:38:03 AM »

Hi Guys;
I'm trying read flash from Ibiza Cupra '02 me7.5 6K0906032 AQX, but i have problem. I use VAG KKL on FTDI. Nefmoto conected with ECU in KWP 2000 baudrate 52800 Fast Init, read Ecu Info sucesfully. But when i chose memory layout (29f400BB) and push button,, Full Flash Ecu" I saw it (screenshot).

Is possible that tuner secured ECU against flash read via OBD???


« Last Edit: November 13, 2013, 09:33:36 AM by alizczewy »	Logged

TCSTigersClaw

Sr. Member

Karma: +15/-6
Offline

Offline

Posts: 353

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #1 on: November 22, 2013, 12:23:15 AM »

Maybe its a se secured file yes. I would try to read in different baudrates /slow init too


	Logged

VAG cars newbie tuner

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #2 on: November 22, 2013, 12:49:49 AM »

Look at the calibration data. It's a tuned file, I'd bet it's protected.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

alizczewy

Guest

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #3 on: November 28, 2013, 09:50:13 AM »

You're right ddillenger File is tuned. No cat, evap, sai, rear O2 etc...aaa and no immo.
Now I swap turbo from S3 and would like change a few things. Is any way (via OBD, because i dont have programmer) to read a secured ECU? Maybe Boot Mode?
Regards Grin


« Last Edit: November 28, 2013, 10:03:10 AM by alizczewy »	Logged

EAG4Racing

Newbie

Karma: +0/-3
Offline

Offline

Posts: 20

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #4 on: December 10, 2013, 11:40:04 AM »

Hello there!

I just tryied to full read my ECU with NefMoto VW Audi ME7 Flasher Logger 1.9.3.2 but I am getting:

10/Dec/2013 12:25:04.254: LOG: Sent message with service ID RequestUpload
10/Dec/2013 12:25:04.264: LOG: Received message with service ID: NegativeResponse
10/Dec/2013 12:25:04.279: LOG: Received negative response for service ID: RequestUpload, with response code: ServiceNotSupported
10/Dec/2013 12:25:04.288: USER: Validation failed, ECU reports RequestUpload service is not supported. RequestUpload may have been disabled by aftermarket engine software.

Does this means I won't be able to extract my bin file not even with boot mode?

will try it later today....


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #5 on: December 10, 2013, 12:22:39 PM »

boot mode with galletto should read these files without a problem.


	Logged

EAG4Racing

Newbie

Karma: +0/-3
Offline

Offline

Posts: 20

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #6 on: December 10, 2013, 04:00:12 PM »

Thank you.

I am doing it right now. I don't know how to ground the pin since is not removable and I need to do it car connected.

Should I do it manually?

suggestions please.


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #7 on: December 11, 2013, 05:24:33 AM »

What do you mean it is not removable?


	Logged

EAG4Racing

Newbie

Karma: +0/-3
Offline

Offline

Posts: 20

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #8 on: December 11, 2013, 08:32:26 AM »

Well I mean the chip isn't removable. I tried to do the boot mode procedure but no luck.
Since I don't have a bench harness I did it while connected to the car! Any way did not work galleto said BOOT MODE INACTIVE

What I didn't do was to unplug battery before grounding pin don't know if that make a difference?


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #9 on: December 11, 2013, 09:19:44 AM »

Quote from: EAG4Racing on December 11, 2013, 08:32:26 AM

You need to leave ignition on and disconnect battery. Then connect battery power while you are grounding the pin. The ECU still has power even with the ignition off.


	Logged

EAG4Racing

Newbie

Karma: +0/-3
Offline

Offline

Posts: 20

	Re: Problem with read flash Nefmoto flasher. SECURED FILE? « Reply #10 on: December 11, 2013, 10:12:12 PM »

Hey thank you I will try it tomorrow morning!

That's a great news for me!

Thx


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 08:54:29 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search