Pages: [1]
Author Topic: EEprom x flash  (Read 3011 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« on: December 15, 2013, 03:25:13 PM »

Hi!

my ecu uses eeprom (Bosch M8.3.2)

The original eeprom is 27c1024, but i change for 28F102

make it, i can read and write my ecu file with galeto? like bosch M7...?

wait

thanks
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: December 15, 2013, 08:05:02 PM »

no. you must still use a programmer.
i use 28f102 as well though fwiw.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 18 queries. (Pretty URLs adds 0s, 0q)