Pages: [1]
Author Topic: r32t runing very rich  (Read 5259 times)
MOOMO
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« on: January 22, 2019, 11:02:45 AM »

Hey

after I finished turboing my r32 I directly bricked my tcu
anyway I fixed that and tuned my ecu and car running  rich (0.977 to 1) and every cold start it starts smoking fuel tirms looks awful
Group 01 Lambada control bank 1 -25%  and  Lambada control bank 2 -25% group 32 shows all fields 0
tuner adjusted  the file and results was
Lambada control bank 1 (-10% to -20%)  and  Lambada control bank 2 -25%

yes both lambada in pipe I don’t think the tuner did the correction to use one lambada to control 6 cylinders fueling is this my problem?? Or anything else
« Last Edit: January 22, 2019, 11:27:16 AM by MOOMO » Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #1 on: January 22, 2019, 11:11:37 AM »

That's stoich, not rich or lean.

Sounds like you need a mono lambda patch. 
Logged
MOOMO
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #2 on: January 22, 2019, 11:19:43 AM »

That's stoich, not rich or lean.

Sounds like you need a mono lambda patch. 


indeed, I told him I wanted 1 lambada instead of 2 but maybe he didn’t understand?

still I think there is more than that issue
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #3 on: January 22, 2019, 11:28:21 AM »

stereo/mono fail is when one bank is max lean the other max rich.

this is just a complete rich fail it looks like.

are those part throttle or idle trims?

you're losing metered air or you have a bad maf

logs would be useful.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
MOOMO
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #4 on: January 22, 2019, 12:03:20 PM »

stereo/mono fail is when one bank is max lean the other max rich.

this is just a complete rich fail it looks like.

are those part throttle or idle trims?

you're losing metered air or you have a bad maf

logs would be useful.


Idel..Both readings is negative, I just swapped with a friend problem is same in my car
and in his car my maf worked fine
« Last Edit: January 22, 2019, 12:05:19 PM by MOOMO » Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041


« Reply #5 on: January 23, 2019, 07:30:43 AM »

You are not tuning the car yourself so what's the point of this thread?
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
MOOMO
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #6 on: January 23, 2019, 09:47:28 AM »

You are not tuning the car yourself so what's the point of this thread?


good question
I don’t know exactly If the problem is software ralted or hardware
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #7 on: January 23, 2019, 11:35:34 AM »

You are not tuning the car yourself so what's the point of this thread?

If he has a mechanical problem, he needs to sort it out...
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041


« Reply #8 on: January 24, 2019, 11:07:42 AM »

Since it has unknown tune on it, we can't help him determine if it's hardware or software right?
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #9 on: January 24, 2019, 11:47:35 AM »

Since it has unknown tune on it, we can't help him determine if it's hardware or software right?

True.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
MOOMO
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #10 on: January 24, 2019, 02:04:52 PM »

Thank everybody

Got a new tune (remotely) today with mono lambada every thing works perfect fuel tirms now -1 to 1, as the tuner (from Poland) said the old tune injectors was not scaled
Probably waaat! lost money on that crap tune and for fuel
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)