Pages: [1]
Author Topic: VAG Commander  (Read 5196 times)
aaronritchie
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 90


« on: April 02, 2013, 11:47:17 AM »

Can the vag commander cable and software read and write to the EEPROM over OBD ?  I want to copy my immo info and write it to a spare ECU .
Logged
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140


« Reply #1 on: April 03, 2013, 05:26:42 AM »

...I want to copy my immo info and write it to a spare ECU .

what ecu? what car?

vw/audi "Immo info" is typically stored in more places than just the ecu, and according to which immo system you have, it may only be stored in the cluster.

The type of ecu will dictate the available methods of reading and writing.

I highly suggest reading through the cluster-&-immobilizer stickies, as well as getting more familiar with the inner workings of the eeproms of your ECU.  95040, 24c02, am29f[X]00BB, and others are well covered here on this forum.
-Cyril
Logged
aaronritchie
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 90


« Reply #2 on: April 03, 2013, 11:04:48 AM »

what ecu? what car?

vw/audi "Immo info" is typically stored in more places than just the ecu, and according to which immo system you have, it may only be stored in the cluster.

The type of ecu will dictate the available methods of reading and writing.

I highly suggest reading through the cluster-&-immobilizer stickies, as well as getting more familiar with the inner workings of the eeproms of your ECU.  95040, 24c02, am29f[X]00BB, and others are well covered here on this forum.
-Cyril

Thanks been reading on it and my ecu is me7.5 . I have made a copy of the immo eeprom using commander .  512 bytes
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)