Pages: [1]
Author Topic: Locating some maps in 4z7 907 551 R, Kfmiop specifically.  (Read 5129 times)
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« on: January 12, 2014, 01:14:17 PM »

I have a good xdf started for the Rbox me7.1.1

I have added KFmirl and now looking at KFMIOP. The auto generated xdf shows the values off. The axis look fine, but the map is wrong. Seems lije the last five columns are in the wrong order.

xdf address shows starting at 0x167FE with column addresses at 0x16960 and rows at 0x1322A.

Here is what I have. 
Logged
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #1 on: January 12, 2014, 03:28:19 PM »

Those addresses are correct. Something about that xdf parameter isn't though.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #2 on: January 12, 2014, 04:47:00 PM »

The raw hex for the table looks just like the calculated values. the last five columns should be the first. I thought the address was starting in the middle.

I did a comparison to the good M box xdf I use and the table constraints are identical except for the addresses.

I attached my xdf to this stage. All the maps for usual changes are in the "my maps" top category. 

"
Logged
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #3 on: January 12, 2014, 04:51:28 PM »

Post your bin.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #4 on: January 12, 2014, 04:53:32 PM »

This one I have been modifying.
« Last Edit: January 12, 2014, 05:09:21 PM by stuklr » Logged
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #5 on: January 12, 2014, 05:00:19 PM »

No need now. Just did a comparison. Looks like I modified KFMIOP when using the wrong xdf and the was confused by the values I put in....

Sometimes I shoudl just go to bed instead of trying to finish something.
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #6 on: January 19, 2014, 07:38:37 PM »

There is 551R DAMOS into net.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)