NefMoto > General > General Discussion > APR ECU and Cluster swap into another S4 with stock ECU and bad cluster
Pages: [1]
« previous next »
Author Topic: APR ECU and Cluster swap into another S4 with stock ECU and bad cluster  (Read 5875 times)
dcc236
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
I have two 2000 Audi b5 s4's. Does anyone here know if a guide or instructions on how to swap an ecu and cluster from one car to the other? One ecu is apr stage 1 and the other is stock. Also, if this is possible with the keys and immobiliser all syncing up, is it then possible to update the mileage on each cluster to reflect the actual?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: December 30, 2013, 11:19:20 AM »
No need to worry about immo on a 2000 S4.

Just get the cluster coding right, vag commader for mileage, and you're done.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #2 on: December 30, 2013, 11:22:30 AM »
Quote from: nyet on December 30, 2013, 11:19:20 AM
No need to worry about immo on a 2000 S4.

Just get the cluster coding right, vag commader for mileage, and you're done.

You forget, not all S4's are in North America....

OP: If you live in Europe, or the rest of the world, swap the gauges, cluster, and the small pill inside the key into the other car. This can all be done via software, but that wasn't what you asked.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Milka
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 129
« Reply #3 on: December 30, 2013, 08:55:21 PM »
Hey Daz,

I know Dave personally he is just trying to find an easy way to keep his Giac tune and also move the working cluster (working pixels) from his car into the new one he just purchased and set the kms correctly for each car.  I have not played with vag commander before so can't comment on that part. 

Oh, and yes these cars are D-box and have immo
Logged
dcc236
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #4 on: January 15, 2014, 12:15:32 AM »
Thanks fellas, the change over was as easy as you suggested. A special thanks to ddillenger for his guidance and advice.

Now to work out how to get each car to show the correct mileage.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: January 15, 2014, 01:00:35 AM »
No worries, glad to help. Check out the "Bench Flashing/VCDS cable for cluster (B5S4)" sticky in the cluster/immobilizer section. The tools you need to correct the mileage are attached.

Smiley

http://nefariousmotorsports.com/forum/index.php?topic=3205.0title=
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 11:56:49 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)