WINOLS gurus: where is TDMLSDS located in M-box S4 file?

Pages: [1]

« previous next »

Author

Topic: WINOLS gurus: where is TDMLSDS located in M-box S4 file? (Read 9275 times)

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	WINOLS gurus: where is TDMLSDS located in M-box S4 file? « on: May 05, 2011, 04:50:06 PM »

I have .OLS for european G-box but can't find similar region in M-box that would host this 1byte variable.

I have a suspicion that this little variable is the ticket for no lift shift.

And if you have .OLS for M-box.... please please please share


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #1 on: May 05, 2011, 05:34:10 PM »

Quote from: julex on May 05, 2011, 04:50:06 PM

my guess is 113AC


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

gremlin

Hero Member

Karma: +196/-9
Offline

Offline

Posts: 653

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #2 on: May 05, 2011, 05:35:19 PM »

Quote from: julex on May 05, 2011, 04:50:06 PM

Try addr 113ACh


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #3 on: May 05, 2011, 07:35:35 PM »

That's not the spot, I really compared the values etc, the region is a bit different around the area with some stuff appearing as missing in comparison to "G" OLS. Apparently this variable as well as some other stuff got compiled into different region (edit:*idea here, search for missing stuff in M box and I might find the stuff I need*)

I don't know if that's the spot but I am wondering how you arrived at this conclusion? I assume you just guessed based on the fact that following region is the same as "G" bin.

Anybody has "M" and "G" box in IDA and could check address references and see what address same code in "M" box accesses?

Thanks.

Otherwise I will have to advance to Yoda level and start IDA dis-assembly, ahha.


« Last Edit: May 05, 2011, 07:40:53 PM by julex »	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #4 on: May 05, 2011, 08:30:43 PM »

Quote from: julex on May 05, 2011, 07:35:35 PM

I assume you just guessed based on the fact that following region is the same as "G" bin.

Yup. Blind ass guess

I was hoping spen would pipe up here and show us how its done!


	Logged

setzi62

Full Member

Karma: +142/-0
Offline

Offline

Posts: 249

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #5 on: May 06, 2011, 02:17:49 AM »

I use a tool called bgrep (binary grep) to search for occurrences of hex patterns,
find attached the executable and source of bgrep.
This tool is quite handy when searching for matching code fragments in different images.

Here is how you can find the location of TDMLSDS if you have the disassembled code
and some basic knowledge about the C167 opcodes available:

1. Search for references to TDMLSDS in the assembler code of an image
with known symbol addresses (here F-Box is shown):
...
87'FDA6: 8A2D06B0 JB [B_kuppl], L_87FDB6 (87'FDB6)
87'FDAA: 9A540460 JNB [00FDA8h].6, L_87FDB6 (87'FDB6)
87'FDAE: F3F81513 MOVB RL4, [TDMLSDS]
87'FDB2: F7F80DA8 MOVB [38280Dh], RL4
...

2. Select a hex search pattern matching this code sequence,
verify that this search pattern is found only once:
bash-3.2$ bgrep "8A2DxxB09AxxxxxxF3F8xxxxF7F8xxxxF3F8xxxx" fbox.bin
fbox.bin: 0007FDA6 -> 8A2D06B09A540460F3F81513F7F80DA8F3F80DA8
-> found only once, see that address (0007FDA6) matches with assembler code (87'FDA6).

3. Have to know that the bit "B_kuppl" is at FD56.8 for M-Box (FD5A.11 for F-Box),
so the instruction "JB [B_kuppl], address"
has pattern "8A2Bxx80" in M-Box compared to "8A2DxxB0" in F-Box
(need to read the C167 documentation to know how opcodes are encoded Tongue

).

4. Search the corresponding pattern in the M-Box image:
bash-3.2$ bgrep "8A2Bxx809AxxxxxxF3F8xxxxF7F8xxxx" mbox.bin
mbox.bin: 0007544A -> 8A2B06809A510400F3F8AC13F7F83BA9
-> also found only once at address 87'544A

5. Check this address in the assembler code of M-box:
...
87'544A: 8A2B0680 JB [B_kuppl], L_87545A (87'545A)
87'544E: 9A510400 JNB [00FDA2h].0, L_87545A (87'545A)
87'5452: F3F8AC13 MOVB RL4, [8113ACh]
87'5456: F7F83BA9 MOVB [38293Bh], RL4
...

-> TDMLSDS is at offset 0x113AC in M-Box as stated by nyet and gremlin (has value 0x33).


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #6 on: May 07, 2011, 08:31:42 PM »

Thanks for all your help, I am starting IDA disassemble though so wish me luck and not many head aches


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #7 on: May 09, 2011, 05:13:12 PM »

Quote from: julex on May 07, 2011, 08:31:42 PM

Thanks for all your help, I am starting IDA disassemble though so wish me luck and not many head aches

anybody has info as to what entry point for IDA should be for m-box.... thatnks!


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #8 on: May 09, 2011, 06:13:47 PM »

Quote from: julex on May 09, 2011, 05:13:12 PM

Quote from: julex on May 07, 2011, 08:31:42 PM

Thanks for all your help, I am starting IDA disassemble though so wish me luck and not many head aches

anybody has info as to what entry point for IDA should be for m-box.... thatnks!

I use the info posted in the below thread and Andy Whittakers site. I am pretty lost when it comes to IDA though. It would be great if someone skilled did a DIY thread or posted a properly disassembled file, maybe even commented.

http://www.nefariousmotorsports.com/forum/index.php/topic,35.0title,.html


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #9 on: May 11, 2011, 11:10:33 PM »

Quote from: julex on May 05, 2011, 04:50:06 PM

I have a suspicion that this little variable is the ticket for no lift shift.

make any progress on this?


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: WINOLS gurus: where is TDMLSDS located in M-box S4 file? « Reply #10 on: May 12, 2011, 07:07:39 AM »

Quote from: nyet on May 11, 2011, 11:10:33 PM

Quote from: julex on May 05, 2011, 04:50:06 PM

I have a suspicion that this little variable is the ticket for no lift shift.

make any progress on this?

Well, yes and no. This one was a blind valley.

However

Eurodyne has this working in their Maestro software so I figured it is just a matter of finding how. Eurodyne's stuff is encrypted though so it would be hard to look at actual tune file and my attempts to Galletto it out in BOOT also didn't work for some strange reason.... They naturally disabled normal flash access to the ROM.

I found a loophole though. Comes out hooking up windbg and dumping the content of Maestro memory space yields a cool tune file since they don't encrypt memory (duh) that is nothing else than M-box binary with usual maps changed plus a very interesting piece of assembly code that provides anti-lag facilities. Basically they altered one of standard code's jumps to their custom piece of code located just before end of binaries. I am not sure what the standard code does but it looks like it must be controlling actual spark event. In the custom code they compare couple of EEPROM space values (where the tune keeps mph for launch control, RPMS and how long to interrupt spark event for no-lift-shift) to current car running values and amount of time lapsed for no-shift-lift.

I will need some help with altering this code to go to alternate memory space location somewhere in standard maps range where I will set up the three new scalars (DWORDS) to control the thing.

I will post the code I see later on.

Thanks.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 08:36:34 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?