Pages: [1]
Author Topic: 2003 Audi TT 1.8T BAM XDF Request 8n0906018h  (Read 8691 times)
!nfern0
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 91

Audi TT 1.8T BAM


« on: September 16, 2014, 08:35:57 AM »

Hi,

I'm trying to learn something about mapping... Slightly increasing Torque... changing A/F Ratio... "Pedalkennlinie"...

Therefore I need the XDF-File for The ECU.
I read the .bin file with memory layout 29F800BB, hope that was right? Unfortunately I found nothing on google about the right layout.  Cry
Maybe I Should open the ECU and take a look on the EEPROM?

Attached the original .bin.

Thanks a lot.
« Last Edit: September 17, 2014, 12:46:32 PM by !nfern0 » Logged
!nfern0
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 91

Audi TT 1.8T BAM


« Reply #1 on: September 20, 2014, 05:36:33 AM »

Hi there again!

Can I use the .xdf file which is found here with my .bin file?

Thank you for your help!
Logged
neuro
Full Member
***

Karma: +24/-9
Offline Offline

Posts: 73


WWW
« Reply #2 on: September 29, 2014, 11:05:15 AM »

Hi there again!

Can I use the .xdf file which is found here with my .bin file?

Thank you for your help!


MAP FOUND: KFZWOP 11x16 @ 0x11557
MAP FOUND: KFZWOP2 11x16 @ 0x11607
MAP FOUND: KFZW2 12x16 @ 0x7C162
MAP FOUND: KFMIRL 16x16 @ 0x150CA
MAP FOUND: KFMIOP 11x16 @ 0x16616
MAP FOUND: KFLBTS 16x12 @ 0x192A5
MAP FOUND: LAMFA 6x15 @ 0x1C98A
MAP FOUND: KFLDIMX 8x16 @ 0x1E200
MAP FOUND: KFLDHBN 8x8 @ 0x1E8F2
MAP FOUND: KFDLULS 8x8 @ 0x1A3B0
MAP FOUND: KFLDRL 10x16 @ 0x1E352
MAP FOUND: LDRXN 16x1 @ 0x1EAD4
MAP FOUND: LDRXNZK 16x1 @ 0x1EB16
MAP FOUND: VMAXNB 1x1 @ 0x1F49A
MAP FOUND: VMAXTM 5x1 @ 0x1F4A8
MAP FOUND: VNMX 1x1 @ 0x116C8
MAP FOUND: NMAXDVG 1x8 @ 0x1F478
MAP FOUND: NMAXGA 1x8 @ 0x1F488
MAP FOUND: NMAX 1x1 @ 0x1679A
MAP FOUND: NMAXDV 1x1 @ 0x1679C
MAP FOUND: NMAXOG 1x1 @ 0x167A2
MAP FOUND: DNMAXH 1x1 @ 0x16794
MAP FOUND: ITNMXH 1x1 @ 0x16798
MAP FOUND: TMOTNMX 1x1 @ 0x1F498
MAP FOUND: TNMXH 1x1 @ 0x167A6
MAP FOUND: CWDLSAHK 1x1 @ 0x186F7
MAP FOUND: CDHSH 1x1 @ 0x1819C
MAP FOUND: CDHSHE 1x1 @ 0x1819D
MAP FOUND: CDHSHE 1x1 @ 0x1819D
MAP FOUND: CDLSH 1x1 @ 0x181AB
MAP FOUND: CDSLS 1x1 @ 0x181B0
MAP FOUND: CLAHSH 1x1 @ 0x10751
MAP FOUND: CLAHSH2 1x1 @ 0x10752
MAP FOUND: CLAHSH2 1x1 @ 0x10752
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLASLPE 1x1 @ 0x10786
MAP FOUND: CLASLVE 1x1 @ 0x10789
MAP FOUND: CLASLVE 1x1 @ 0x1078C
MAP FOUND: KRKTE 1x1 @ 0x1C830
Logged
!nfern0
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 91

Audi TT 1.8T BAM


« Reply #3 on: October 23, 2014, 09:07:46 AM »

Thank you for your information.

I spent some hours creating the xdf-file. Please find attached.

I have two additional questions concerning MLHFM and KRKTE.

MLHFM: How do i manage in TunerPro to get the Volt-Axis right?  Huh

KRKTE: Is this conversion factor right?

See screenshot attached.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 19 queries. (Pretty URLs adds 0s, 0q)