Pages: 1 [2]
Author Topic: Little Help :-)  (Read 9696 times)
tryme09
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #15 on: August 01, 2014, 07:28:08 AM »

http://nefariousmotorsports.com/forum/index.php?topic=5770.0

Thats the only one i found might be worth some while as you hellped this gentleman define some of the maps, i searched and searched for your post could not locate it but this might be enough to get me going i will give it a go and define more as i go...  first i will flash then go from there if you or anyone else runs accross your post please let me know if its not too much trouble...
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #16 on: August 01, 2014, 08:43:12 AM »

http://nefariousmotorsports.com/forum/index.php?topic=5770.0

Thats the only one i found might be worth some while as you hellped this gentleman define some of the maps, i searched and searched for your post could not locate it but this might be enough to get me going i will give it a go and define more as i go...  first i will flash then go from there if you or anyone else runs accross your post please let me know if its not too much trouble...
what are you asking for a def file for the ak?
here
Logged

Giving your mom a tuneup
tryme09
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #17 on: August 01, 2014, 02:02:31 PM »

Yeah thats it thanks man.. yeah i was just looking for bin that will work for the ecu i have that already has some maps defined and Mr.DDillinger said AK file shall do it since the ecu i got here there is not much info on it.. am reading as much as i can but iv been working like crazy 60-70 hours a week and plus school, little man thats 7months... thats why i just needed little head start so i can get the raddo on the road :-)  i just need to adjust the injectors cat and rear 02 delete and vvt delete since i am running aeb .. enough to get me on the road for now
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)