NefMoto > Technical > Data Logging > VagCom datalogging resets every 5 secons!!!!!!!!
Pages: [1]
« previous next »
Author Topic: VagCom datalogging resets every 5 secons!!!!!!!!  (Read 6870 times)
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« on: September 29, 2014, 05:44:27 PM »
Hi friends. I need some advice. I am been helping a friend with a 1992 VW Corrado SLC VR6 with 021906258CD 0261203041 ECU.
I can connect to ECU, read DTCs, clean it, etc.... but when I try to made some datalogs using measuring values, VagCom connection resets every 5seconds aprox. ECU´s earths have been checked several times and are OK.
Anyone have the same trouble? Some advice will be great.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #1 on: September 29, 2014, 09:27:42 PM »
What variables are you trying to log? What did you plan on doing with the information? Are you trouble shooting an issue?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #2 on: September 30, 2014, 04:49:06 AM »
Quote from: vwaudiguy on September 29, 2014, 09:27:42 PM
What variables are you trying to log? What did you plan on doing with the information? Are you trouble shooting an issue?

In try to solve a dieseling problem. But any measure block you log, it starts ok and after 5 seconds aprox, I get Block #xxx Error in it fields.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #3 on: October 07, 2014, 12:44:16 PM »
Get a genuine cable instead of china shit and everything will magically work.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #4 on: October 07, 2014, 01:09:40 PM »
Quote from: prj on October 07, 2014, 12:44:16 PM
Get a genuine cable instead of china shit and everything will magically work.

Thanks a lot for your recommendation. The weird thing is that I try using VCDS Lite and a dumb FT232RL KKL cable without luck too. That is the same cable I have been using in my car during years, without any trouble at all.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #5 on: October 07, 2014, 03:51:49 PM »
That's the difference between a genuine cable and a china KKL or a china hex clone.
The fact that it worked on your X car does not mean it will work on another car.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #6 on: October 07, 2014, 03:57:16 PM »
The sad thing is that ME7Logger will work with just about any FTDI cable.

VCDS? Newp.

Pay to play. Not a fan of the VDCS clones. They're garbage.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick
« Reply #7 on: October 08, 2014, 02:50:14 PM »
Not related to the logging, but I have had dieseling issues on my old 2E engine due to a short cirquit in the injector loom. When this is grounded, the engine will not shut down because it keeps the main relay open. Could remove my key from the lock and car would not die. Hope this helps in your search :-)
Logged
My project (all photos back online!)
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #8 on: October 09, 2014, 05:16:08 AM »
Quote from: TijnCU on October 08, 2014, 02:50:14 PM
Not related to the logging, but I have had dieseling issues on my old 2E engine due to a short cirquit in the injector loom. When this is grounded, the engine will not shut down because it keeps the main relay open. Could remove my key from the lock and car would not die. Hope this helps in your search :-)

Thanks a lot for the comment. I will check it too. At least ignition key controls car properly.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 04:43:43 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0s, 0q)