Tables in Tunerpro..

Pages: [1]

« previous next »

Author

Topic: Tables in Tunerpro.. (Read 4273 times)

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Tables in Tunerpro.. « on: July 02, 2011, 09:12:22 PM »

I can never seem to get them to have values that make sense as far as the x and y axis are concerned. I'm assuming I need to change settings in Tunerpro? I've been on here (forums) quite a bit and am using a supposedly compatible bin and xdf, but the values are always off...I have quite a bit of exp. tuning standalone systems so am not completely clueless.. Grin

Except in this case!!! Cheesy


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Tables in Tunerpro.. « Reply #1 on: July 02, 2011, 09:30:19 PM »

Right click on table, edit parameter in xdf, what is the address step? Try setting it to zero if it is not already.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 02:38:30 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search