Pages: [1]
Author Topic: Misfire detection in Bosch Me7.x  (Read 3846 times)
vtraudt
Sr. Member
****

Karma: +4/-7
Offline Offline

Posts: 377


WWW
« on: November 23, 2014, 06:37:38 AM »

What inputs (sensors, parameters, etc.) is Bosch using to detect 'misfires' in general and cylinder specific misfires in particular?
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
hopsis
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 174


« Reply #1 on: November 23, 2014, 11:59:20 PM »

It measures the engine rpm's very closely. If one cylinder takes more time to complete it's work cycle it's misfiring. It's not that simple of course, there are many other variables to take into consideration also but that's the basic way. This has been very thoroughly explained in the "Bosch System Strategy" PDF that can be downloaded from this forum.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)