Pages: [1]
Author Topic: Hard Cut Limiter  (Read 4796 times)
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« on: December 10, 2014, 01:05:12 PM »

Hello,

Similar question, but how could you implement a hard cut limiter, rather than a soft cut?  At the actual RPM limit, not the launch soft one.

I know you can change the cut RPM, but it only does it for a short period and then goes soft again.  Custom code?
Logged
spacey3
Full Member
***

Karma: +12/-1
Offline Offline

Posts: 198


« Reply #1 on: December 12, 2014, 02:26:39 AM »

I'm pretty sure a hard cut needs to be coded in, the only limiter we have is a soft one.

You could put the anti lag/NLS code on and mess with the parameters to get it to work when you're moving/at high rpm/without clutch engaged, would probably end up breaking things though.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #2 on: December 12, 2014, 02:30:01 AM »

If it only gets hard for a short time, then is soft again, you might see a physician. They make pills for that.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
spacey3
Full Member
***

Karma: +12/-1
Offline Offline

Posts: 198


« Reply #3 on: December 12, 2014, 04:40:44 AM »

If it only gets hard for a short time, then is soft again, you might see a physician. They make pills for that.

 Cheesy Actually made me burst out laughing in work then, thanks Ddillenger
Logged
funnix
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 76


1.8t AUM


« Reply #4 on: December 12, 2014, 05:05:21 AM »

You made my day, DD
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)