NefMoto > Technical > Tuning > Open loop boost
Pages: 1 [2]
« previous next »
Author Topic: Open loop boost  (Read 17901 times)
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #15 on: February 25, 2015, 02:42:05 AM »
There's a nearly finished CB hacked file on here, I'm sure.  Pretty sure it's Dan's!
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401
« Reply #16 on: February 25, 2015, 05:59:25 AM »
Can you not set boost up with a gauge/ boost logger on dyno and add a fixed duty cycle to the 1500mbar row on IMX and the ECU will only use that set duty cycle for pressures over 1500mbar and for the RPM sites?  Obvilously need to be setup under engines highest load.
Logged
spacey3
Full Member
***

Karma: +12/-1
Offline Offline

Posts: 198
« Reply #17 on: February 25, 2015, 06:16:02 AM »
Quote from: carsey on February 25, 2015, 05:59:25 AM
Can you not set boost up with a gauge/ boost logger on dyno and add a fixed duty cycle to the 1500mbar row on IMX and the ECU will only use that set duty cycle for pressures over 1500mbar and for the RPM sites?  Obvilously need to be setup under engines highest load.

You can, but as DD and prj mention, temperature and altitude will affect what boost you get for a given duty cycle.
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #18 on: February 25, 2015, 07:07:05 AM »
another noob question:

This is how it worked in the 10+ years before the 5120hack?
No corrector for IAT and altitude?
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401
« Reply #19 on: February 25, 2015, 07:31:15 AM »
Does anyone know how much boost is affected at different altitudes and atmospheric temperatures?

What did the early AGU me3.8 do or was this worked out differently?
Logged
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6039
« Reply #20 on: February 25, 2015, 03:00:41 PM »
Quote from: aef on February 25, 2015, 07:07:05 AM
another noob question:

This is how it worked in the 10+ years before the 5120hack?
No corrector for IAT and altitude?

There is LDIATA and KFLDIOPU, but trying to control boost using PWM on a bleed valve in open loop is just asking for disaster.
Worst case, fit a MBC in parallel, and set DC to 100% over a certain requested pressure, and let the MBC handle it.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826
« Reply #21 on: February 26, 2015, 05:28:59 AM »
Quote from: carsey on February 25, 2015, 07:31:15 AM
Does anyone know how much boost is affected at different altitudes and atmospheric temperatures?
What did the early AGU me3.8 do or was this worked out differently?

There are some maps that modifies boost (LOAD) base in temperature and/or altitude:
Intake Air Temp: KFLDSAK, KFLDTVAK
Altitude: KFLDSHK.
There are some others but I think these are the most important ones.
Logged
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6039
« Reply #22 on: February 26, 2015, 10:36:44 AM »
Quote from: eliotroyano on February 26, 2015, 05:28:59 AM
There are some maps that modifies boost (LOAD) base in temperature and/or altitude:
Intake Air Temp: KFLDSAK, KFLDTVAK
Altitude: KFLDSHK.
There are some others but I think these are the most important ones.


There is no boost in M3.8.x. Pressure does not exist in that ECU.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #23 on: February 26, 2015, 11:05:56 AM »
Quote from: carsey on February 25, 2015, 07:31:15 AM
Does anyone know how much boost is affected at different altitudes and atmospheric temperatures?

PV = nRT

It is literally baked into the load->boost calculation path.

Please review the s4wiki again.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 03:40:44 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0s, 0q)