Pages: [1]
Author Topic: Moates roadrunner cable issue, where to get the 44pin extensions?  (Read 4837 times)
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640



I got a bunch from Moates when I got the emulator, but none of them work. The spades that pierce the insulation to make the connection aren't sufficient, and as a result they don't function. Emulator works right off the board, but I'd like to be able to close the case. Anyone found any sources?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Minor Threat
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #1 on: June 09, 2014, 10:47:11 AM »

Have you contacted Moates? Craig is usually very good about stuff like this, in my experience.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #2 on: June 09, 2014, 10:49:54 AM »

Have you contacted Moates? Craig is usually very good about stuff like this, in my experience.

Yup, I did. The thread was not meant to be defamatory towards moates, I have an RMA and am sending the cables back this week. Just wondering where everyone got theres Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Minor Threat
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #3 on: June 25, 2014, 11:25:11 AM »

Oh I didn't take it that way at all, I was more thinking if anyone knew, he would!
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: June 25, 2014, 11:35:47 AM »

Oh I didn't take it that way at all, I was more thinking if anyone knew, he would!

Turns out the cables have to be used in sets, 2 cables daisychained to reverse the polarity.

Who knew? The info is now on the site.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #5 on: April 04, 2015, 11:15:10 AM »

.
« Last Edit: April 13, 2015, 10:36:58 PM by vwaudiguy » Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 18 queries. (Pretty URLs adds 0s, 0q)