NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > ned login pin from this dump audi rb4
Pages: [1]
« previous next »
Author Topic: ned login pin from this dump audi rb4  (Read 6038 times)
pattaya2001
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« on: April 26, 2015, 01:15:57 PM »
hi all problem with my dump of, dash corrupt by vag kan i find same dump but can have login to try i use vag eeprom but can t read the loginwith  and vag dash i have error 01  i want to recode the dashwith vag com but miss pin i post the dump thanks by asvance
 its rb4 audi 4 quattro  reference  8E0920900K  RB4 D35 THANKS
Logged
A6_C5_Allroad
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 116
« Reply #1 on: April 27, 2015, 08:20:13 PM »
Quote from: pattaya2001 on April 26, 2015, 01:15:57 PM
hi all problem with my dump of, dash corrupt by vag kan i find same dump but can have login to try i use vag eeprom but can t read the loginwith  and vag dash i have error 01  i want to recode the dashwith vag com but miss pin i post the dump thanks by asvance
 its rb4 audi 4 quattro  reference  8E0920900K  RB4 D35 THANKS

I'm attaching 2 screenshots of your BIN file in "HEX EDITOR NEO" . One screenshot in HEX, the other in Decimal.  You should be able to figure it out with the info provided.  Look at horizontal line: xxx0030  and vertical lines: 02 and 03     That information contains your SKC code. The formula for determining your SKC is in the link that I copied and pasted in this reply and attached a photo of the breakdown.

LINK: http://nefariousmotorsports.com/forum/index.php?topic=2973.0title=
Logged
A6_C5_Allroad
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 116
« Reply #2 on: April 27, 2015, 08:27:58 PM »
Quote from: pattaya2001 on April 26, 2015, 01:15:57 PM
hi all problem with my dump of, dash corrupt by vag kan i find same dump but can have login to try i use vag eeprom but can t read the loginwith  and vag dash i have error 01  i want to recode the dashwith vag com but miss pin i post the dump thanks by asvance
 its rb4 audi 4 quattro  reference  8E0920900K  RB4 D35 THANKS

You convert the HEX read to DECIMAL in a hex editor like NEO, then your reverse values from 0000030 lines 02 ( 174 ) & 03 ( 35 ) and you have your SKC.

Your SKC appears to be:  35174      You reverse the two numbers, LINE 02 = 174   LINE 03 = 35  Hence: 35174
« Last Edit: April 27, 2015, 08:31:21 PM by A6_C5_Allroad » Logged
pattaya2001
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #3 on: April 29, 2015, 12:19:17 AM »
THANKS FOR HELP 
i test and give you feedback
Logged
pattaya2001
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #4 on: April 30, 2015, 03:32:40 AM »
HI 
fo rvcds its a good login  but can t connect after to ecu  no answers from ecu  because the ecu is on immo off ok i look another solution  thanks 
Logged
pattaya2001
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #5 on: May 04, 2015, 11:59:13 AM »
FEEDBACK
AT THIS TIME NO CONNECTION WITH VCDS TO ECU BECAUSE   IMMO OFF BY HARDWARE ..SOLDERING//
I AM LOOKING TO GO BACK IMMO ON BY SOFTWARE
ONLY CONNECTION WITH VAG COMMANDER TO ECU  AND VAG EEP PROG TO CLUSTER
THE DASH IS IN DEF MODE  AND CAR IN SAFE MODE BUT START IF TAKE OFF THE CLUSTER THE CAR RUN OK  
I AM LOOKING TO TRY PAIRING  ECU AND DASH WHEN THE ECU GO BACK TO IMMO ON I THING ITS A GOOD WAY  
« Last Edit: May 04, 2015, 05:33:42 PM by nyet » Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12271


WWW
« Reply #6 on: May 04, 2015, 05:34:02 PM »
Your post looked important in all caps so I made it more important looking for you
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
A6_C5_Allroad
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 116
« Reply #7 on: May 05, 2015, 02:04:03 AM »
Quote from: nyet on May 04, 2015, 05:34:02 PM
Your post looked important in all caps so I made it more important looking for you

lol, i'm having a hard time understanding exactly what he's asking.  Sounds like he's not getting immo pairing with cluster since removing, or altering the ECU 95040 eeprom. 

Nyet, you know waaay better than I, but isn't all he has to do is rewrite the original eeprom bin back to the 95040, or write IMMO OFF image to eeprom??
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 11:46:56 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)