Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Cluster and Immobilizer
(Moderator:
ddillenger
) >
Access Touran Cluster: Problems with VAG Tacho etc.
Pages: [
1
]
« previous
next »
Author
Topic: Access Touran Cluster: Problems with VAG Tacho etc. (Read 9137 times)
Qnkel
Newbie
Karma: +0/-0
Offline
Posts: 4
Access Touran Cluster: Problems with VAG Tacho etc.
« on: May 17, 2015, 01:11:58 AM »
Hello,
I'm desperated. I want to change the cluster in my 2004 touran.
I have a china vcds 12.12 (firmware 1.92), a china vcds 10.6 (firmware 1.84) and a china vag tacho 5.0 usb with k+can.
I tried vag tacho 5.0. It connects to the cluster but says "Wrong seed-key! Try manual mode for VDO". But when i try manual mode, it doesn't matter what i choose, an error occur "is not a valid integer". I think it is a bug in the cracked vag tacho. (see screenshot)
Vag Tacho connects over CAN-TP2.0.
I downloaded many versions of vag tacho but no other recognize my vag tacho cable - only the version that cames with the cable.
Now i tried to install the virtual com port for the vag tacho cable and try vag k+can commander 1.4, 3.0, 3.6 and 5.5 - no one connects.
Can anyone help me with vag tacho or how another software is usable?
I want to change the cluster, learn my old keys on it and change the mileage.
Thank you very much!
Logged
k0mpresd
Hero Member
Karma: +146/-54
Offline
Posts: 1655
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #1 on: May 17, 2015, 01:21:33 AM »
buy genuine VT and get support from developer, if theres still an issue. he is always happy to help. problem solved.
Logged
Qnkel
Newbie
Karma: +0/-0
Offline
Posts: 4
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #2 on: May 17, 2015, 02:28:14 AM »
Thanks for the advise. I hoped that i can use the vt-cable for another tool to get on my cluster or the eeprom.
I already checked the original manufactor. I tought that vag tacho is a really china tool and not a clone, i'm sorry. I knew only VAGdashCAN before.
Logged
k0mpresd
Hero Member
Karma: +146/-54
Offline
Posts: 1655
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #3 on: May 17, 2015, 02:33:30 AM »
genuine VT straight from developer. cost is very reasonable as well and loads better than that chinese scrap.
http://opelinfo.com
Logged
H2Deetoo
Sr. Member
Karma: +26/-1
Offline
Posts: 257
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #4 on: May 18, 2015, 04:14:38 AM »
What partnr is your cluster?
What eeprom is used, and what cpu is used?
Rgs H2Deetoo
Logged
Qnkel
Newbie
Karma: +0/-0
Offline
Posts: 4
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #5 on: May 22, 2015, 09:49:46 AM »
Partnr is 1T0 920 870 F
EEPROM and CPU unknown... haven't it opened yet.
Logged
H2Deetoo
Sr. Member
Karma: +26/-1
Offline
Posts: 257
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #6 on: May 26, 2015, 06:36:22 AM »
Could you also tell cpu and eeprom type?
Logged
Qnkel
Newbie
Karma: +0/-0
Offline
Posts: 4
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #7 on: May 27, 2015, 12:50:09 PM »
I disassembled it and checked:
CPU: Micronas CDC 3297G
EEPROM: 24C16
Logged
ocostel
Newbie
Karma: +0/-0
Offline
Posts: 3
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #8 on: June 20, 2015, 10:15:04 AM »
Hi,
Did you solve the problem with Vag Tacho ? I'm in the same situation !
Logged
H2Deetoo
Sr. Member
Karma: +26/-1
Offline
Posts: 257
Re: Access Touran Cluster: Problems with VAG Tacho etc.
« Reply #9 on: June 23, 2015, 03:24:14 AM »
The Vagtacho 5.0 China clone doesn't support this Micronas mcu
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 29, 2024, 11:36:33 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...