Pages: 1 [2]
Author Topic: boost map help me7.5  (Read 15110 times)
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #15 on: June 29, 2015, 01:07:56 PM »

here is in VCDS

First log doesn't even have RPM

Quote
i see that spec boost in hi revs are overvalued

How can you possibly tell that by only logging req boost and a few load variables?
« Last Edit: June 29, 2015, 01:10:56 PM by nyet » Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
elerium
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« Reply #16 on: June 29, 2015, 01:18:28 PM »

RPM present in boht logs.
about overvalued - i think this physical limitation of compressor
It if necessary, i can post here grid with my logs
« Last Edit: June 29, 2015, 01:29:01 PM by elerium » Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #17 on: June 29, 2015, 01:40:34 PM »

RPM present in boht logs.

Great. Have to add a special case for "Idle Speed" thanks to some shitty VCDS clone.

Quote
about overvalued - i think this physical limitation of compressor

So rework LDRXN or KFLDHBN accordingly.

Quote
It if necessary, i can post here grid with my logs

No, get proper logging working first.
« Last Edit: June 29, 2015, 01:50:14 PM by nyet » Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
elerium
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« Reply #18 on: June 29, 2015, 01:46:09 PM »

ok, i understand, thanx
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)