i would appreciate it if someone could please confirm my locations for soft launch control. I used the fully defined CB ols file to compare to my file and get locations but I cannot get it to activate. If anyone can think of any other reason why I cant get it to work let me know and ill look into it, thanks.
Also I Don't believe that CWNMAXMD is used in my file from what I have been reading on the forum.
VNMX (11DA3) 1.25 km/h.
DNMAXH (1687E) set to 50RPM
ITNMXH (16882) set to 0 seconds
NMAX (1687A) Set to 4500RPM
NMAXOG (168AA) set to 7000 RPM
TMOTNMX (29EFA) set to -48
TNMXH (168AE) set to 655.3500 seconds.
sean
You have a couple addresses incorrect:
NMAX: 0x168A2
TMOTNMX: 0x29F8A
CWNMAXMD: 0x11D93
