Pages: [1]
Author Topic: 8N0906018AP 360847 basefile open loop  (Read 3100 times)
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1598


« on: January 23, 2016, 11:28:08 AM »

i created a basefile for a TT with S3 MAF and 550 Bosch EV14
rear O2 is removed

Is there a reason it is open loop and not reaching lambda 1 at idle?
current dtcs:
17834 N80 TANK VENT VALVE
17841 J299 SAI pump relay
17840 N112 SAI RELAY
17695 N249 SUV VALVE

Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: January 23, 2016, 11:33:49 AM »

i created a basefile for a TT with S3 MAF and 550 Bosch EV14
rear O2 is removed

Is there a reason it is open loop and not reaching lambda 1 at idle?
current dtcs:
17834 N80 TANK VENT VALVE
17841 J299 SAI pump relay
17840 N112 SAI RELAY
17695 N249 SUV VALVE



Until you disable powerstage diagnosis you will not get trims or lambda regulation.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1598


« Reply #2 on: January 23, 2016, 12:06:00 PM »

power stage is eskonf according to the wiki

so either reconnect all four (car is a bit apart at the moment) or tell the car it is not equipped with this parts.

thx
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)