No start after ECU read??Any ideas?

Pages: [1]

« previous next »

Author

Topic: No start after ECU read??Any ideas? (Read 6499 times)

nitrorocket

Full Member

Karma: +0/-4
Offline

Offline

Posts: 53

	No start after ECU read??Any ideas? « on: November 14, 2015, 09:29:35 PM »

Car is a 2003 Audi A6 2.7t. The ecu was read though obd with fuse 5 & 15 removed using Kess V2 to ensure there would be no interruption during the read. When read was complete ksuite asked "Do you want to run errors deletion". The options were ok or cancel, it then ran a little more, then said it was complete. I read two Porsches today with no issues at all.

Ran a scan with vcds. 18089 Control module Programming not finished P1681-35-00-

Car will crank but not run, anyone heard of this?

Why would it ask me to f up the ECU after a read?? Lol

Thanks for any experience or advice.


	Logged

nitrorocket

Full Member

Karma: +0/-4
Offline

Offline

Posts: 53

	Re: No start after ECU read??Any ideas? « Reply #1 on: November 14, 2015, 09:42:26 PM »

Car is a 2003 Audi A6 2.7T 6-speed.

HW: 0261208288
SW: 1037368391
VIN nr.:
SW ver.:
Spare:
Engine: 2.7L V6/5VT
HW Ver.:
SW upg.: 4Z7907551S 0020


	Logged

zillarob

Full Member

Karma: +13/-1
Offline

Offline

Posts: 152

	Re: No start after ECU read??Any ideas? « Reply #2 on: November 14, 2015, 09:44:28 PM »

You see this yet?

http://nefariousmotorsports.com/forum/index.php?topic=981.0title=


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: No start after ECU read??Any ideas? « Reply #3 on: November 14, 2015, 09:46:08 PM »

that sticky needs a better topic


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

nitrorocket

Full Member

Karma: +0/-4
Offline

Offline

Posts: 53

	Re: No start after ECU read??Any ideas? « Reply #4 on: November 14, 2015, 11:11:28 PM »

Tomorrow I will hook up my Kess v2 to the obd connection and see if it will let me flash the 4Z7907551R file. I hope that will work!


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: No start after ECU read??Any ideas? « Reply #5 on: November 15, 2015, 10:27:45 AM »

Quote from: nyet on November 14, 2015, 09:46:08 PM

that sticky needs a better topic

DUN


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

nitrorocket

Full Member

Karma: +0/-4
Offline

Offline

Posts: 53

	Re: No start after ECU read??Any ideas? « Reply #6 on: November 15, 2015, 04:40:07 PM »

I tried to flash in the 551s file with no luck, so I re read the ECU, used recovery mode with Kess Ksuite and it ran again!!

Thank you so much for advice!


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: No start after ECU read??Any ideas? « Reply #7 on: November 15, 2015, 06:11:24 PM »

Quote from: nitrorocket on November 15, 2015, 04:40:07 PM

I tried to flash in the 551s file with no luck

I would not flash s back into that ecu.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 09:36:31 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search