Pages: [1]
Author Topic: looking for ecu pinout that has the ignition coils and icm's b5 s4 6spd  (Read 8987 times)
bjaroch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5



im finally about wrapped up with my build but when I tried to fire it up, it seems like the ignition is firing out of order. I hard wired in 2.0t coils and deleted icm's so I want to continuity test each coil to see that I wired it all correctly.


so far all the pinout ive found don't have any of the coils or icm's on it
Logged
sedefcha
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1 on: October 18, 2023, 12:52:00 PM »

For future reference: pinout is the same as of 3.0 ASN from B6

Pin  94 is Cyl 3 grey/yellow
Pin  95 is Cyl 6 grey/brown
Pin 102 is Cyl 1 white/green
Pin 103 is Cyl 4 white/brown
Pin 110 is Cyl 2 white/green
Pin 111 is Cyl 5 green/brown
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)