Ecu fuse blown from tuned file!

Pages: [1]

« previous next »

Author

Topic: Ecu fuse blown from tuned file! (Read 4752 times)

judeisnotobscure

Sr. Member

Karma: +38/-10
Offline

Offline

Posts: 379

	Ecu fuse blown from tuned file! « on: August 21, 2011, 08:42:10 PM »

So I figured out how to blow an ecu fuse with a computer file.
I messed with ftomn on the no lift shift s4 file on my e85 tune. I set it to like 25, this was a bad call... you will blow ecu fuses and not be able to drive. If you want to disable it, just raise the setpoints on launch rpm and shift rpm instead.


	Logged

I have a b5 s4
but i just want to dance.

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Ecu fuse blown from tuned file! « Reply #1 on: August 22, 2011, 02:25:03 PM »

Are the coilpacks on that same circuit?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

NOTORIOUS VR

Administrator
Hero Member

Karma: +58/-7
Offline

Offline

Posts: 1056

	Re: Ecu fuse blown from tuned file! « Reply #2 on: August 22, 2011, 08:32:32 PM »

Quote from: vwaudiguy on August 22, 2011, 02:25:03 PM

Are the coilpacks on that same circuit?

doubt it... the CP's are tied into the FP relay... but have their own fuse if I remember correctly.

I'm going to assume the IGN FET's were drawing too much power


	Logged

SCHNELL ENGINEERING BLOG · STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning

judeisnotobscure

Sr. Member

Karma: +38/-10
Offline

Offline

Posts: 379

	Re: Ecu fuse blown from tuned file! « Reply #3 on: August 22, 2011, 08:35:49 PM »

I think you are right notorious


	Logged

I have a b5 s4
but i just want to dance.

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 04:02:57 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search