NefMoto > Technical > Tuning > TT ME7.5 TUNE CAP?
Pages: 1 [2]
« previous next »
Author Topic: TT ME7.5 TUNE CAP?  (Read 5269 times)
slmmdmiata
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 18
« Reply #15 on: October 01, 2025, 09:19:18 AM »
Quote from: JeanAwt on September 30, 2025, 09:45:12 PM
your last 100% lamfa axis was still at 0.95

WOW, i see what you mean with your mappack, but i used your address, for my axis and it seemed to look correct, i will attach screenshot, just to show you, even though you have corrected it anyway. thank you again sir. will test it later and hopefully dyno car soon.
Logged
JeanAwt
Sr. Member
****

Karma: +17/-15
Offline Offline

Posts: 327
« Reply #16 on: October 01, 2025, 12:08:09 PM »
on this capture nothing goes 0.95 stock must be in the last columns. property inverted the axes this will also be more understandable. and be more progressive in your values ​​not from 1 to 0.84
Logged
A4 B5 1.8T ONLY
fknbrkn
Hero Member
*****

Karma: +219/-24
Offline Offline

Posts: 1538


mk4 1.8T AUM
« Reply #17 on: October 01, 2025, 01:50:41 PM »
add 1 to lamfa map offset
Logged
slmmdmiata
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 18
« Reply #18 on: October 02, 2025, 08:31:34 AM »
Quote from: JeanAwt on October 01, 2025, 12:08:09 PM
on this capture nothing goes 0.95 stock must be in the last columns. property inverted the axes this will also be more understandable. and be more progressive in your values ​​not from 1 to 0.84

Yes , i will smoothen maps now i see its working  Roll Eyes
Logged
slmmdmiata
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 18
« Reply #19 on: October 07, 2025, 12:35:30 PM »
HELP PLEASE Tongue

I put the car on the dyno today and the results were poor Undecided

It made 238hp max, and stock was 227hp.

Maybe someone can carry on pointing me in the right direction.

I will attach the logs from the dyno run, the tune and the dyno printout.

Thanks to everyone!
Logged
davidklmn
Newbie
*

Karma: +3/-0
Offline Offline

Posts: 11
« Reply #20 on: October 07, 2025, 03:55:46 PM »
Based on the csv you've put in the zip file:

If I see correctly, then you're not requesting enough load
Logged
JeanAwt
Sr. Member
****

Karma: +17/-15
Offline Offline

Posts: 327
« Reply #21 on: October 08, 2025, 06:06:35 AM »
especially with k04 hybrid + connecting rods you can ask for much more
Logged
A4 B5 1.8T ONLY
slmmdmiata
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 18
« Reply #22 on: October 08, 2025, 06:40:33 AM »
Quote from: JeanAwt on October 08, 2025, 06:06:35 AM
especially with k04 hybrid + connecting rods you can ask for much more

I will try, but this car has made more power in the past with this kind of boost.. thats why i was going to keep pushing gradually, but expected more HP at nearly 1.3bar
Logged
davidklmn
Newbie
*

Karma: +3/-0
Offline Offline

Posts: 11
« Reply #23 on: October 08, 2025, 07:03:33 AM »
See picture:

lines with green arrows pointing to them -> your load limits set in the software
lines with dark blue arrows pointing to them -> your requested and actual load

red line between both -> your potential AFAIK
Logged
slmmdmiata
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 18
« Reply #24 on: October 08, 2025, 10:23:39 AM »
ok guys, i will give it "more beans" Grin

Will let you know how i get on!
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 17, 2025, 01:20:18 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 15 queries. (Pretty URLs adds 0s, 0q)