Pages: [1]
Author Topic: Using my VagCom with nefmoto software  (Read 2761 times)
djholtz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« on: January 20, 2016, 08:45:37 PM »

Hi,
I want to use Nefmoto's flasher and ME7 Logger but i don't know where is my KKL cable. I bought another one but is delayed and i need to do some logs.
I have an clone VagCom V11.8, is possible to use or modify ept to use with these programs?

Thanks for help and for the brilliant forum
Best regards
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #1 on: January 20, 2016, 09:47:12 PM »

Hi,
I want to use Nefmoto's flasher and ME7 Logger but i don't know where is my KKL cable. I bought another one but is delayed and i need to do some logs.
I have an clone VagCom V11.8, is possible to use or modify ept to use with these programs?

Thanks for help and for the brilliant forum
Best regards

My ori cable has a tick box on the driver to put it into vcp mode,  not use ur cable does can if not it may work.
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)