Assembling file after IDA disassemble

Pages: [1]

« previous next »

Author

Topic: Assembling file after IDA disassemble (Read 4724 times)

mbwiejska12

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 37

	Assembling file after IDA disassemble « on: January 14, 2016, 01:02:58 AM »

Hi.

Is it any chance to return assembling file directly in IDA if I've done some changes in code?
Or we must doing it by any c166 assembler?
What I look, assemblers don't have simmilar entertainment to IDA like word_xxxxxx byte_xxxxxx. Code must be definied other way.


	Logged

roman_tyk

Full Member

Karma: +0/-0
Offline

Offline

Posts: 87

	Re: Assembling file after IDA disassemble « Reply #1 on: January 14, 2016, 02:41:46 AM »

If you incject some code into ori software of course you can dissasembly again and check your work.


	Logged

mbwiejska12

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 37

	Re: Assembling file after IDA disassemble « Reply #2 on: January 14, 2016, 11:00:49 AM »

But I mean if I could disasembly by IDA --> incject some changes to code also in IDA and assemble also by Ida. Is it executable?


	Logged

fknbrkn

Hero Member

Karma: +185/-23
Offline

Offline

Posts: 1454

mk4 1.8T AUM

	Re: Assembling file after IDA disassemble « Reply #3 on: January 14, 2016, 11:59:03 AM »

nope
im using keil -> hex output -> import hex in hex redactor

you should use asm syntax to define variables
and dont forget about segments or pages

Code:

mov r4, 0F043h ; 0xF043

Code:

pussy EQU 0F043h
...
mov r4, pussy ; 0xF043

Code:

exts #38h, #1
mov r4, 0433h  ; 0x380433

etc


	Logged

mbwiejska12

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 37

	Re: Assembling file after IDA disassemble « Reply #4 on: January 15, 2016, 09:03:36 AM »

Thank you a lot for giving a tips. Now it is clear for me


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 03:51:07 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search