Pages: [1]
Author Topic: Overriding the automatic height control  (Read 2685 times)
Dallas
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


IMMO, EEPROM, SKC, 95050... ugh.


WWW
« on: January 19, 2016, 05:22:42 PM »

Hello all,
I've searched around the web, and I'm not finding any information on being able to override the automatic height control. I'm wondering if it is even possible! The reason I'm looking into it is because I drive in some areas where the roads aren't very favorable, but I want to do the 402 mod so it looks pretty. From the way I understand it, any adjustments made to lower the suspension, will lower each level setting since you're essentially calibrating the height sensors to think it's sitting too high. With that in mind, I'll need to drive in the higher settings, but I'm thinking the speed restrictions will just keep dropping me down. Which brings me to my whole point, can the automatic lowering/raising be disabled or overridden?

If this has been brought up before, a link to that post would be great, or if this is a common thing to do away with and I just keep missing it, then enlighten me please. Thank you in advance!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)