Is it Possible to write MPC in MED9.1 2.0TFSI ??

Pages: [1]

« previous next »

Author

Topic: Is it Possible to write MPC in MED9.1 2.0TFSI ?? (Read 4798 times)

tobygolf66

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 40

	Is it Possible to write MPC in MED9.1 2.0TFSI ?? « on: January 24, 2016, 02:43:21 PM »

Hi, did anybody know, is it possible to write MPC in MED9.1 2.0TFSI ?

I have here a damaged ECU, we tried something in the Code to implement LC Code,

after writing Flash over OBD the Ecu not work.

We have tried all, write back complete Ori BDM backup with EVC BDM100 , Ktag and Galletto but no result.

VCDS find ECU but only shit.

Someone has an idea how we can fix this ecu ??

rgds


	Logged

turbojohan

Full Member

Karma: +5/-0
Offline

Offline

Posts: 185

	Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? « Reply #1 on: January 24, 2016, 03:19:39 PM »

Try this.

Johan


	Logged

tobygolf66

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 40

	Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? « Reply #2 on: January 24, 2016, 03:29:26 PM »

hi, thanks but what is different in this file ??

i have tried 5 or 6 ori full bdm projects , also with immo off and so on

rgds


	Logged

gman86

Hero Member

Karma: +45/-128
Offline

Offline

Posts: 705

	Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? « Reply #3 on: January 25, 2016, 06:09:07 AM »

Did the ECU work after it was written to BDM the first time? Writing over the port will never brick an ECU to the point where it would never work again. BDM will always recover. It must be physically damaged.

What happens when you try to start? Do radiator fans come on with ignition on?


	Logged

tobygolf66

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 40

	Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? « Reply #4 on: January 25, 2016, 06:13:30 AM »

we did try all, but no chance, physically ecu is ok 100%

we wrote OBD only the file with the LC code and after that Fans are running, or maybe i have damaged the MPC with wrong

syntax in LC code Bootsector ??

i didn´t find the fault :-(

rgds


	Logged

turbojohan

Full Member

Karma: +5/-0
Offline

Offline

Posts: 185

	Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? « Reply #5 on: January 25, 2016, 08:15:11 AM »

i you write back stock with bdm it should run.
If eeprom damaged or put in from other car you need to correct immo or turn it off.
Did you do checksum before writing bdm?

If ecu is ok and still doesn't start and no engine light in dash check motor relais.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 11:59:07 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search