Pages: [1]
Author Topic: NEED Pin for learn key (i will donate you 25$! if pin works)  (Read 4155 times)
chasenl
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14


« on: September 03, 2017, 02:27:06 AM »

Hi Friends,

I have a replacement dash for my Audi TT 8N 1.8T FWD year 2000 but need pin i created a full dump of the new cluster with vagcommander and a dump with vagtacho. If some1 can help me?

i think pin of the orig dash is 2193 i need to program my key again

If some1 can help me get my car working again will donate you 25$ with paypal


Thanks
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601


« Reply #1 on: September 03, 2017, 04:59:21 AM »

You have to read MC68HC912DG128 or MC68HC912D60 with programmer or carprog
Logged
4ringpieces
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 232


« Reply #2 on: September 03, 2017, 12:41:47 PM »

Read original pin from your engine ecu, that's the easy bit.

these marelli dash clusters hate both vag commander and vag tacho do not write anything with this tools.

The vag tacho file is trash.
The other file isn't as bad but its still not right.

You ebay cluster could be any of the following:

01271
65280
00030
00778

Am i right in thinking your ebay cluster is showing 128000miles roughly? or 206000KM

If your Uk based i can do this on the bench without soldering or over the obd port
Logged
chasenl
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14


« Reply #3 on: September 03, 2017, 12:54:37 PM »

Thanks for you reply i will try the pin tommorow m


Verzonden vanaf mijn iPhone met Tapatalk
Logged
chasenl
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14


« Reply #4 on: September 03, 2017, 12:55:31 PM »

Thanks for you reply i will try the pin tommorow m


Verzonden vanaf mijn iPhone met Tapatalk
Yes the cluster is showing 206km


Verzonden vanaf mijn iPhone met Tapatalk
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)