Pages: [1]
Author Topic: Nefmoto won't recognize cable. VCDS does  (Read 3361 times)
carterl96
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 15


« on: February 05, 2016, 01:02:44 PM »

For some reason it won't recognize the cable. It's a KKL 409.1 from the recommended list. Went through and drivers say they're already updated. It's on port 1. Ignition was on, nefmoto just won't recognize it. I'm running windows 10. Not sure if that's an issue or not.
Logged
carterl96
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 15


« Reply #1 on: February 05, 2016, 01:06:50 PM »

8D0907551L
MAF - Hitachi
Transmission - Tiptronic
Memory Chip - 29F800BB
Serial Memory Chip - 95040


This is the information on the ECU
Logged
carterl96
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 15


« Reply #2 on: February 05, 2016, 02:59:03 PM »

CH340 Chip in the cable. Am I just fucked or is there a work around?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #3 on: February 05, 2016, 03:43:10 PM »

CH340 Chip in the cable. Am I just fucked or is there a work around?

Throw it away.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)