Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
agu me 3.8 with vr6 maf
Pages: [
1
]
« previous
next »
Author
Topic: agu me 3.8 with vr6 maf (Read 7278 times)
Ga3T
Newbie
Karma: +0/-1
Offline
Posts: 12
agu me 3.8 with vr6 maf
« on: July 24, 2015, 11:45:24 AM »
i know the max maf reading on agu is around 187
deos this mean if i fit vr6 maf it will read more than 187?
i have k04 with stock maf and injectors maf reading is 187
now i fitted bigger injectors and vr6 maf with new tune
it reads now 153.
so is 153 is ok?
or it should get mote than 187?
Logged
Rick
Hero Member
Karma: +63/-4
Offline
Posts: 704
Re: agu me 3.8 with vr6 maf
« Reply #1 on: July 24, 2015, 12:27:07 PM »
Depends how it's been tuned.
Logged
Ga3T
Newbie
Karma: +0/-1
Offline
Posts: 12
Re: agu me 3.8 with vr6 maf
« Reply #2 on: July 25, 2015, 12:04:53 AM »
how i can calculate the hp now?
150*1.3/0.8?
Logged
evolution
Newbie
Karma: +1/-1
Offline
Posts: 10
Re: agu me 3.8 with vr6 maf
« Reply #3 on: July 25, 2015, 12:32:06 AM »
you have to make a recalibration of the software. MAF linearization , calibration of the injectors and modify maps and multipliers . You will not have to convert power, and the ECU will indicate the true value of air flows , torque
Logged
Ga3T
Newbie
Karma: +0/-1
Offline
Posts: 12
Re: agu me 3.8 with vr6 maf
« Reply #4 on: July 25, 2015, 03:55:56 AM »
Didnot understand you
So the tune is not ok?
Logged
Ga3T
Newbie
Karma: +0/-1
Offline
Posts: 12
agu with vr6 maf housing
« Reply #5 on: May 20, 2016, 01:36:38 PM »
i have Q HOW TO CALCULATE HP AFTER FITTING VR6 HOUSING WITH NEW MAP?
MY CAR READS 158 GS/S WITH VR6 HOUSING WITHOLD MAP STOCK HOUSING WAS 187GS
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: agu me 3.8 with vr6 maf
« Reply #6 on: May 20, 2016, 01:45:35 PM »
WHAT
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
eliotroyano
Hero Member
Karma: +48/-8
Offline
Posts: 825
Re: agu me 3.8 with vr6 maf
« Reply #7 on: May 20, 2016, 01:57:56 PM »
Quote from: evolution on July 25, 2015, 12:32:06 AM
you have to make a recalibration of the software. MAF linearization , calibration of the injectors and modify maps and multipliers . You will not have to convert power, and the ECU will indicate the true value of air flows , torque
Well said in just 2 lines
Logged
Carsinc
Sr. Member
Karma: +17/-2
Offline
Posts: 447
Re: agu me 3.8 with vr6 maf
« Reply #8 on: May 20, 2016, 08:23:30 PM »
Quote from: nyet on May 20, 2016, 01:45:35 PM
WHAT
agreed
Logged
6L20vt
Full Member
Karma: +2/-0
Offline
Posts: 152
Re: agu me 3.8 with vr6 maf
« Reply #9 on: May 23, 2016, 10:42:26 PM »
hello, if you're using the original sensor, you must use mafadjustus to calculate your new map maf . if you are using a full maf 3 " including the original sensor, perhaps you can use the mlhfm a s3 / tt engine bam . in either case you have to recalibrate the software to go with that maf.quizas have to recalibrate more things , I'm having a similar problem with a maf of leon cupra , and I 'm using the mlhfm a leon.bin , so it is not so simple, it takes time and testing to work well . greetings
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 24, 2024, 12:41:20 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
