Pages: [1]
Author Topic: find bit _mil  (Read 5106 times)
6L20vt
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 152


« on: June 04, 2016, 09:52:16 PM »

Hello everyone, I'm trying to locate the bit where the _mil in my file, as I should, or should seek. thank you for your help
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: June 14, 2016, 07:10:12 PM »

Hello everyone, I'm trying to locate the bit where the _mil in my file, as I should, or should seek. thank you for your help

If its an Me7 file , run it through the me7 logger to create a ecu file and it will tell you
Logged
.
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 29


« Reply #2 on: June 15, 2016, 04:14:54 PM »

If its an Me7 file , run it through the me7 logger to create a ecu file and it will tell you

hello, I have generated my .ecu file, but as I know the address of B_MIL
Logged
.
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 29


« Reply #3 on: June 15, 2016, 04:47:28 PM »

ok, I opened the file in Excel and have obtained this. I think that is located in 0x00FD24, which means the value stayed at bitmask? littco thank you've been of great help. Wink
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: June 15, 2016, 05:22:14 PM »

lol excel.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)