NefMoto > Technical > NefMoto Software > Nefmoto Immo
Pages: [1]
« previous next »
Author Topic: Nefmoto Immo  (Read 14514 times)
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136
« on: October 03, 2011, 05:26:38 AM »
When using this software on bench flash ecu anyway getting round the immo to use nefmoto software?? Connects just can,t read/ write to the ecu immo stopping it
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056
« Reply #1 on: October 03, 2011, 05:29:57 AM »
i was flashing two differet cars yesterday that had immo and they work fine.

Provide more info please
Logged
SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
thom337
Full Member
***

Karma: +15/-1
Offline Offline

Posts: 81
« Reply #2 on: October 03, 2011, 07:53:01 AM »
He's flashing on the bench...IMMO must be bypassed or validated for flash write security access.
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136
« Reply #3 on: October 03, 2011, 02:12:30 PM »
I can flash complete file via galletto ( boot mode) but using the nefmoto software to read validate etc requires immo defeat any way to defeat this then Huh

06a 906 032 hj
0261206736
1037362287

And

8n0 906 018 j
0261206794
1037360314
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136
« Reply #4 on: October 06, 2011, 12:11:47 PM »
so any way of defeating to IMMO with galletto??
or will i need to set up cluster and key  set up adapted to ecu to work like this
Logged
thom337
Full Member
***

Karma: +15/-1
Offline Offline

Posts: 81
« Reply #5 on: October 06, 2011, 03:42:09 PM »
you don't defeat the immo with galletto...you flash it in boot mode so it no longer requires it to be disabled.
Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704
« Reply #6 on: October 07, 2011, 08:08:37 AM »
MPPS can flash without Immo being authenticated.  It tries, says immo not ready, then asks you for a power cycle.  Once you've done that, it reads no problem!

Rick
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136
« Reply #7 on: October 07, 2011, 03:18:11 PM »
Quote from: thom337 on October 06, 2011, 03:42:09 PM
you don't defeat the immo with galletto...you flash it in boot mode so it no longer requires it to be disabled.

I can flash with galletto no probs in boot mode but using nefmoto software where I have the problem will have a play and try what's been posted above
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136
« Reply #8 on: October 09, 2011, 06:57:30 AM »
Quote from: Rick on October 07, 2011, 08:08:37 AM
MPPS can flash without Immo being authenticated.  It tries, says immo not ready, then asks you for a power cycle.  Once you've done that, it reads no problem!

Rick

tried nefmoto software on bench in boot mode no good just getting
Starting slow init connection.
Connecting to address 0x01.
Slow init failed.
Disconnected
Huh?
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056
« Reply #9 on: October 09, 2011, 09:49:01 AM »
Nefmoto doesn't support boot mode... you will need another cable and software to do that.

You should really do some more reading before trying to flash an ECU.  It's clear you have little knowledge about anything going on here.  And that is how you mess things up.
Logged
SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136
« Reply #10 on: October 12, 2011, 10:38:10 AM »
i'm just trying to learn hence why its just ecu on bench not in a car etc etc (learn for mistakes and all that ) i know nefmoto don't support boot mode just asking if they was away round it on bench. got to start somewhere, anyways thanks for peoples help
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056
« Reply #11 on: October 12, 2011, 01:37:14 PM »
there is a way around it.. and it's been said here already....

you can flash it on the bench with Galletto in boot mode. 
Logged
SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 01:20:25 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0s, 0q)