Pages: [1]
Author Topic: Flash change issue  (Read 3195 times)
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« on: July 13, 2016, 12:43:02 PM »

Just to help in case someone got in some like this

Had an 8L S3 here yesterday, used old ole MPPS:

- read by OBD OK, try to write with MPPS but it stuck in 800C...

- take fuse off and try again, and again stuck in 800C...

- try with old 1260 Galetto and it said it cant erase flash.

take ECU out and find an "no-AMD" 29F800AB there.

Even boot mode didnĀ“t work either, had to desolder and after putting an AMD29F800BB there it back to work by OBD
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)