NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N
Pages: [1]
« previous next »
Author Topic: Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N  (Read 5277 times)
brodway2800
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14
H,
Trying to locate ESKONF address, so far no luck. Tried 0x10c70, did not work for me. I know that it might be a different address since its a european ECU
Im trying to switch off SAI and its relay's, maybe someone will guide me, or point where to start
I have attached the stock file
Thanks in advance
Logged
brodway2800
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14
??
Logged
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449
Quote from: brodway2800 on November 22, 2016, 11:35:31 AM
H,
Trying to locate ESKONF address, so far no luck. Tried 0x10c70, did not work for me. I know that it might be a different address since its a european ECU
Im trying to switch off SAI and its relay's, maybe someone will guide me, or point where to start
I have attached the stock file
Thanks in advance

Can you define what you mean by "Tried" i have a complete a2l for the 4Z7907551R (maybe for N too)and it shouldn`t be that hard to much yours...
Logged
brodway2800
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14
im trying to remove rear lambda sensors.
Posted picture above, i think thats the eskonf, as i managed to switch of SAI, and lambda sensors but, still dont know how to eliminate lambda heating. As i unplug them ecu shows fault with lambda heating. And when you go to live readings, i can se that it is on
Logged
brodway2800
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14
maybe some adjustment needs to be done to CDTHSHE CDTHSHE2 or CLRHK CLRHKA ?
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 395
ESKONF - Output configuration, other codewords for functioning (at least in ME7.1.1.) can be in another area usually a group of 00/01's after FF area (circled attached pic) - plus you'll find them around the map areas for that function so look for an 01 to change to 00 in those map areas if you have a def file.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 10:08:47 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)