Pages: [1]
Author Topic: Can anyone read/write/tune E36 DMEs?  (Read 7762 times)
Smitherines
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 4


« on: December 09, 2011, 08:02:49 AM »

With the lack of available info for tuning BMWs altogether, since it's such a closed door situation, has anyone tried to tune these cars? It would be nice to bring the E36 into a state where the car can be tuned by the end user.  Anyone have any info?

Thanks guys.
Logged
®@©E®
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 1


« Reply #1 on: December 10, 2011, 03:26:33 PM »

Bosch M1.7, M3.1, M3.3.1 and Siemens MS40 are easily tuneable with chip burner / emulator.
I don't have experience with later ecus like Bosch M5.2 and Siemens MS41, though they can be done via OBD2.
Logged
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 539


« Reply #2 on: January 03, 2012, 11:26:32 AM »

theres tons of bmw info out there, more so than motronic 7/9 by a long shot.  You are looking in the wrong places.


as the other guy said, they are cake to tune and find info, just get yourself a willem or something to write chips, and theres tons of tunerpro def's out there.

LMK what ecu you have, i have some project files from the past that MAY help you Wink
Logged
Smitherines
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 4


« Reply #3 on: January 03, 2012, 12:19:56 PM »

Perhaps I should have clarified that I have a 1997 M3. I need to be able to flash this thing. That's the only thing holding me back from turboing her! I need something to flash through the OBD2 port, unless theres another method.
Logged
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 539


« Reply #4 on: January 11, 2012, 12:04:43 PM »

theres a ton of methods.  search for flash tools for MS41 or whatever ecu is in that car.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)