Pages: 1 ... 17 18 [19]
Author Topic: MED9 HPFP & LPFP Control  (Read 416505 times)
notoriousg
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 14


« Reply #270 on: May 04, 2026, 04:31:03 AM »

Update to this. My previous settings worked, but i kept getting low pressure regulation codes, so i just copied KFFLAF map (x,y axis+values) from a RS3 file and i can confirm this works best with the stock LPFP controller. No LPFP DC limitations, no fuel cuts, no LPFP controller overheating. Running it on absolutely stock hardware apart of a RS4 FPRV and a downpipe. Here is a screenshot of the settings.
Logged
Pages: 1 ... 17 18 [19]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)