Pages: [1]
Author Topic: O2 sensor  (Read 4671 times)
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« on: October 09, 2017, 02:57:10 PM »

Hello,
I've got a fairly quick question.
As far as I've read on the forums and seen it mentioned, like, everywhere, the ME7.1 is a narrowband ecu, on 1.8t that is.
I swapped my car to a 24V VR6 and it has a ME7.1G ECM, which is paired with a single 6 wire O2 sensor and the post cat one, which would make me think it's a wideband?
I might want to go MAFless some day, so I was thinking if I'll need to swap the ecu to ME7.5?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-167
Offline Offline

Posts: 12235


WWW
« Reply #1 on: October 09, 2017, 03:34:54 PM »

I might want to go MAFless some day

why?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #2 on: October 09, 2017, 03:51:18 PM »

why?
Might want to try and figure out how to do an ITB setup on a stock ECU. It would make more sense going with a standalone, I know, I know, but living in a not so wealthy country is the reason I might not want to shed a grand on an ECU, if it's avoidable somehow
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #3 on: October 10, 2017, 12:30:57 AM »

You could do ITB and still have MAF, just put a airbox on it Smiley
Logged
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #4 on: October 10, 2017, 05:18:18 AM »

You could do ITB and still have MAF, just put a airbox on it Smiley

I guess, but the clearance on a MK4 24v already is tight, so building an efficient airbox could be quite a struggle.
I'm also one of the guys who 'doesnt like the look of a MAF', so if it is indeed a wideband, which I think it is, just need a confirmation, I dont see a problem going MAFless.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #5 on: October 10, 2017, 12:27:19 PM »

By your description, yes I believe it is a wideband. (6 wire pre cat probe and a post cat probe)
But not 100% sure since its a VR6 Smiley
Logged
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #6 on: October 10, 2017, 09:28:44 PM »

By your description, yes I believe it is a wideband. (6 wire pre cat probe and a post cat probe)
But not 100% sure since its a VR6 Smiley

Is there any way I can check? Like, measure some blocks in vagcom or something similar?
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #7 on: October 10, 2017, 11:02:54 PM »

What is the software number of the ECU?
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #8 on: October 12, 2017, 08:05:53 AM »

Yes its probably wideband, but thats not the point, its also DBW...

Logged
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #9 on: October 13, 2017, 06:04:40 AM »

What is the software number of the ECU?
I guess this is the software number? 362915? It's a version 0005.

Yes its probably wideband, but thats not the point, its also DBW...
I'm almost certain that I could sacrifice a throttle body and make a DBW ITB setup. It would slightly reduce the throttle response, but I'm after the volumetric efficiency of the ITBs which can go even above 100% at a set range. Also, as far as I know, the idle control is done by the ECM with the throttle plate, so that would make it slightly easier to set up the ITBs, if I COULD get it to work.
Looked up DBW ITBs and looks like Honda people have done it quite a bit
« Last Edit: October 13, 2017, 06:15:17 AM by GatisGirdenis » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 18 queries. (Pretty URLs adds 0s, 0q)