Pages: [1]
Author Topic: ME7logger doesn't work after flashing with USA/CDN software Audi 4.2 V8  (Read 4919 times)
alizczewy
Guest

Hi there Cheesy

I've got confusing problem. The car is  Euro Audi A6 4.2 BAT:

HWNumber          = {0261208363}
SWNumber          = {1037370690}
PartNumber        = {4F0910560   }
SWVersion         = {0030}
EngineId          = {4.2L V8/5V     }

I used to log this car with me7Logger on genuine software without any troubles, but recently I found fully defined .bin with a2l which was supplied for USA/CDN market:

HWNumber          = {0261208364}
SWNumber          = {1037504110}
PartNumber        = {4F0910560A  }
SWVersion         = {0030}
EngineId          = {4.2L V8/5V     }

So Finally I decided to flash the ECU with this file. After flashing every thing seems be right, but logging with ME7Logger is no longer possible. The thing is, on that file(US market) there isn't communication with ECU through K-Line. On this software the ECU uses CAN bus for diagnostic. What do you think guys, is there any option to logging the ecu with ME7Logger through CAN bus?

I atached description of file what has been uploaded to ecu.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: October 24, 2016, 06:19:20 PM »

is there any option to logging the ecu with ME7Logger through CAN bus?

No
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
kpematop
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #2 on: November 04, 2018, 02:18:41 PM »

Hello,
can you please upload original 4F0910560A ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 18 queries. (Pretty URLs adds 0s, 0q)