Pages: [1]
Author Topic: ZWMIN questions  (Read 3681 times)
Cadensdad14
Full Member
***

Karma: +8/-1
Offline Offline

Posts: 134


« on: June 05, 2018, 04:48:25 PM »

So I'm making my own angular and instead of just cutting the dwell time, I'm enriching the mixture and severely retarding the spark.  I've gotten what I need for KFZW, KFZW2, LAMFA, and LAMBTS.  To get spark sufficiently retarded, which maps do I need to edit?  I'm assuming KFZWMN, but I also think KFZWMS may need adjustmentioned too.  I've managed to find KFZWMS, to be able to run stock except when anti-aging is active.  I'm having an issue in the disassembly  finding the pointer for KFZWMN.  Would I create am issue lowering KFZWMN in genreal operation if I edited it for the high load, high rpm ares?  For example at 190 load and 4000 rpms, I can't think of any reason spark would  be  retarded.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #1 on: June 05, 2018, 11:55:39 PM »

Why?
Logged
Cadensdad14
Full Member
***

Karma: +8/-1
Offline Offline

Posts: 134


« Reply #2 on: June 06, 2018, 03:00:34 AM »

Antilag.  It's a rally car.  If I can get the nls and lc using this I'm going to work out a rolling antilag.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #3 on: June 06, 2018, 03:03:00 AM »

How are you going to get it to activate when you want though?  IE: how would you turn it off so you can drive through it normally?
Logged
Cadensdad14
Full Member
***

Karma: +8/-1
Offline Offline

Posts: 134


« Reply #4 on: June 06, 2018, 08:18:26 PM »

I've set up a ram location as a flag.  When launch control conditions are active bit 0 is 1.  When no lift shift is active bit 1 is one.  When the flag is 0, normal operation  continues, when it's greater than zero alternate maps are used.
Logged
jjuuaannk
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 89



« Reply #5 on: June 06, 2018, 09:02:31 PM »

I've set up a ram location as a flag.  When launch control conditions are active bit 0 is 1.  When no lift shift is active bit 1 is one.  When the flag is 0, normal operation  continues, when it's greater than zero alternate maps are used.

It would be interesting to learn how to do that
Logged

Leon Cupra R 1M
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)