LTFT question

Pages: 1 [2]

« previous next »

Author

Topic: LTFT question (Read 10102 times)

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: LTFT question « Reply #15 on: May 31, 2018, 07:15:17 AM »

I dont have any k04 files I got s6 v10 and 1.8t files and 2.0 tfsi files for k04, would you be able to share one please?


	Logged

Beaviz

Full Member

Karma: +8/-4
Offline

Offline

Posts: 190

	Re: LTFT question « Reply #16 on: May 31, 2018, 07:22:42 AM »

Search and you shall find (one example that took me 5 seconds to find):
http://nefariousmotorsports.com/forum/index.php?topic=9702.0


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: LTFT question « Reply #17 on: May 31, 2018, 11:15:40 AM »

Thank you guys will check in to it.


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: LTFT question « Reply #18 on: May 31, 2018, 02:19:16 PM »

thank you for the help i see my A2L file dose not have that map for some reason here is my ORI if someone can help me find it please

i end up finding it dose this address look correct

1D7236 for KLPRAIL shows 0 mpa to 14MPa
map says this so i think i got it correct
Characteristic curve for converting rail pressure sensor voltage into rail pressure

would i copy the k04 map in to my k03 file says
k04 is 0.00000 10.00000 20.00000
k03 is 0.00000 7.00000 14.00000


« Last Edit: May 31, 2018, 02:42:45 PM by birchbark506 »	Logged

Beaviz

Full Member

Karma: +8/-4
Offline

Offline

Posts: 190

	Re: LTFT question « Reply #19 on: June 01, 2018, 05:52:58 AM »

You got it


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: LTFT question « Reply #20 on: June 01, 2018, 07:33:24 AM »

Thank you since its brand new I'm going to swap it and fix that map up and see how the ltft is after that.


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: LTFT question « Reply #21 on: June 12, 2018, 06:42:09 AM »

I rescaled the g247, and now I'm getting a p0191 dtc around 8.6% load at 160-170km saying volts from sensor are 14.7


	Logged

gman86

Hero Member

Karma: +45/-128
Offline

Offline

Posts: 705

	Re: LTFT question « Reply #22 on: June 12, 2018, 02:43:10 PM »

Quote from: birchbark506 on June 12, 2018, 06:42:09 AM

I rescaled the g247, and now I'm getting a p0191 dtc around 8.6% load at 160-170km saying volts from sensor are 14.7

That's battery voltage. Reference sensor voltages should be 0-5v. You've got some dodgy wiring somewhere.


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: LTFT question « Reply #23 on: June 13, 2018, 03:02:53 AM »

I edited the fueling map and I end up getting the dtc to go away now I'm back to logging, thank you guys.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 10:24:54 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?