Pages: 1 [2]
Author Topic: What if I brick my ECU ?  (Read 9105 times)
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #15 on: August 15, 2018, 02:06:34 PM »

Thats not good, I tought Me7.1.1 = Me7.1.1

So the magic Question is, what will work ?
Does it have to be only petrol or does it have to be from a V6, from a Turbo ?


One of two things have happened:

It's not an ME7
It wasn't a diesel
Logged
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 86


« Reply #16 on: August 15, 2018, 10:47:50 PM »

Hmm, okay I'll going to look for a petrol ECU.

Anyone interested in a 2,5 TDI ECU ?  Grin
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« Reply #17 on: August 18, 2018, 03:12:47 AM »

If the flash does interuppt and you know the checksum is ok.  just re-flash it without trying to start the car.   It will over-write fine.  Issue is when the ECU is tried to start it will brick up
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Online Online

Posts: 2800



« Reply #18 on: August 18, 2018, 10:41:20 AM »

ive even got 1 key cycle too before it bricks. ive had situation where i could reconnect but it would stall flash at where it was originally interrupted. cycle the key once and reconnect and flashed away. this is happened on me7.5 and me7.1.1 before
Logged

Giving your mom a tuneup
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #19 on: August 20, 2018, 02:16:41 PM »

I soft bricked mine once - spent the best part of a morning making a bench cable and reading up on bootmode etc.

I learnt the hard way, and now keep a spare ECU which is immo off and ready to go
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 18 queries. (Pretty URLs adds 0s, 0q)