Pages: 1 [2]
Author Topic: Removing DTC for CAM/CRANK sensors.  (Read 7628 times)
prj
Hero Member
*****

Karma: +1068/-476
Offline Offline

Posts: 6007


« Reply #15 on: August 29, 2018, 10:34:02 PM »

If you have a sensor correlation error the only reason for this is either the cam chain or the timing belt installed incorrectly.
End of story.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)