Hey guys, I drive a 2001.5 S4 which comes with the M-box ECU and I've read that the M-box and A-Box are interchangeable so I ended up buying an A-box with stgIII eurodyne software along with their maestro cable. I have been all throughout Nefmoto and VW vortex trying to find the exact procedure I need to do in order to make this ECU work in my car. This is what I have found out, - I need to recode the engine and recode the cluster with vagcom to support the correct MAF and so on....My questions are

1. When I put the A-box into my car and start the recoding, am I recoding my "car" to accept the A-box or recoding the ecu to accept my car?(i.e recoding the ecu to a M-box or Recoding my car to A box style)
2. M-box runs on the Hitachi MAF, If im recoding my car to accept and A box is there ANY way of keep my hitachi MAF instead of switching to Bosch (A box)
3. "You need to copy the relevant tables for the Hitachi MAF from your current M-box tune to the A-box tune via TunerPro" someone's response on VW vortex. This doesn't seem right for some reason. Can someone elaborate?

Once again its a 2001.5 S4 (stock with M-Box, Hitachi MAF) I am trying to put an A box (Bosch MAF) with StgIII Eurodyne software into it. These are suppose to be interchangeable, any insight or help is GREATLY APPRECIATED